FMC (FPGA Mezzanine Card)
Connectors for Xilinx and Altera FPGAs
Introduction:
Vita 57 provides a mechanical standard for I/O
mezzanine modules. This standard introduces a methodology that shall
allow the front panel IO of IEEE 1101 form factor cards to be
configured, via mezzanine boards. Vita 57 modules have fixed locations
for serial/parallel IOs, clocks, Jtag signals, VCC, and GND. HiTech
Global's Vita 57 modules can be plugged into any Vita 57 based boards.
The FMC standard specifies Samtec’s SEARAY™
connector set. The VITA 57 SEAM/SEAF Series system provides 400 I/Os in
a 40 x 10 configuration or 160 I/Os in a selectively loaded 40 x 10
configuration, in 8.5mm and 10mm stack heights.
Modules
Picture/Block Diagram
Description
Ordering Information
FMC daughter card with one CX4,
two SATA, and two SMA ports (interfacing to total of 8 serial
transceivers). Each port has its own on-board dedicated clock
for maximum flexibility and ease of use.
HiTech Global Design & Distribution, LLC
2059 Camden Ave. Suite # 160
San Jose, CA 95124 - USA
Tel : + 1 408 781-7778
Fax: + 1 408 268-4173 info@hitechglobal.com