Vita 57 provides a mechanical
standard for I/O mezzanine modules. This standard introduces a
methodology that shall allow the front panel IO of IEEE 1101 form factor
cards to be configured via mezzanine boards. Vita 57 modules have fixed
locations for serial/parallel IOs, clocks, Jtag signals, VCC, and GND.
HiTech Global's Vita 57 modules can be plugged into any Vita 57
compliant carrier boards.
This FMC Module provides access to one QSFP+ (40G) and two SFP+ (10G)
ports for Gigabit Ethernet applications. The DP0-DP3 ports are
connected to the QSFP+ and the DP4-DP5 to the SFP+ connectors. The default frequency for
all ports is set to 156.25MHz. Additional footprint for installing the
second oscillator with different value is also available on the module.
SFP+ (2x10G) Connectors
►x1 QSFP+ (1x40G) Connector - or x4 SFP+ ports using the QSFP+ to SFP+
Place holder for installing the second
oscillator of choice
(direct interface to the FPGA)
HTG-FMC-SFP-OC-E (with one 156.25MHz crystal oscillator )