ZRF-FMC-4A4D: Xilinx
Zynq® UltraScale+™ RFSoC
FMC+ (Vita57.4) Platform
ZRF-FMC is a Vita57.4 compliant
daughter card adding FPGA gates and ADC/DAC interfaces available in
Xilinx ZU28DR or ZU48DDR RFSoC devices to Vita57.4 compliant FPGA
carrier boards.
The ZRF-FMC
is supported by four
12-bit ADC
4.096 GSPS
(ZU28DR) or 14-bit ADC 5 GSPS (ZU48DR) and four 14-bit DAC
6.4 GSPS
(ZU28DR) or 10 GSPS (ZU48DR) ports. The ADC and DAC ports
are supported through high-performance front panel micro Rf
connectors.
The ZRF-FMC
mates with Vita57.4 compliant FPGA
carrier cards to provide RF connectivity to systems.
The ZRF-FMC
is supported by 8GB DDR4
components for each Processor and Programmable Logic side.
Mated with the
HTG-930 Platform
Mated with the
HTG-9200 Platform
|
Main
Features:
►Xilinx
Zynq UltraScale+
RFSoC ZU28DR
or ZU48DR
►x4
ADC (12-bit or 14-bit) ports
►x4DAC (14-bit) ports
►x1
Vita57.4 FPGA Mezzanine Connector (FMC+ male) with 60
LVDS I/Os and 16 GTY (32.75Gbps) Serial Transceivers
►Independent
DDR4 memory for the FPGA and the ARM Processors ( 8GB
component for each interface)
►Configuration
Flash
►x1USB/UART
ports ( Processor sides)
►Programmable
Clocks (with default frequencies but programmable through I2C bus)
►External
Synchronous Clock port
►Dimensions:
78 mm x 69 mm
|
Kit Content:
Hardware:
-
HTG-FMC-4A4D Xilinx Zynq UltraScale+ RFSoC platform
Reference Designs/Demos:
- DDR4 Memory Controller
Documents:
- User Manual
- Schematics (in searchable .pdf format)
Ordering & Availability
Information
HTG-ZRF-FMC-4A4D-28
HTG-ZRF-FMC-4A4D-48
12" SSMC To SMA Cable
24" SSMC To SMA Cable
1 Meter SSMC To SMA Cable |
|
