►FPGA Boards
Selection Guide
►FMC
Modules Selection Guide |
HTG-828:
Xilinx
Virtex UltraScale 100GIG Networking Card
Populated with Xilinx Virtex UltraScale 080, 095,
125, 160, or 190 FPGA , the HTG-828 network card provides access to
sixteen lanes of PCI Express
Gen 3 ( 16 x 8Gbps), one QSFP28 (4x25Gbps),
two CFP4 (4x25Gbps), one Cypress QDR-IV memory, two independent
banks of DDR4 (72-bit) memory components (10), and up to 8 SMP ports
connected to 8 GTY (33G) serial transceivers.
The HTG-828 provides additional features and
functionalities through its Vita57 compliant FMC port and one
high-performance Z-RAY ports. The ZRAY port is populated
with 16 GTY (16x30.5G) serial transceivers along
with power (12V/5A, 3.3V/16A, & VCCIO/1A), differential clock, and
control signals (single-ended and I2C I/Os). The Z-RAY connector hosts
expansion modules requiring large number of serial transceivers with
maximum performance and minimum noise. HiTech Global provides Z-RAY
modules with Hybrid Memory Cube, (HMC), QSFP28, CFP4, and
CDFP (400G) interfaces.
Supported FPGA devices:
|
XCVU080 |
XCVU095 |
XCVU125 |
XCVU160 |
XCVU190 |
Effective LEs(K) |
936 |
1,129 |
1,504 |
1,945 |
2,256 |
Logic Cells (K) |
780 |
941 |
1,253 |
1,621 |
1,880 |
Block RAM (Mb) |
50.0 |
60.8 |
88.6 |
115.2 |
132.9 |
DSP Slices |
672 |
768 |
1,200 |
1,560 |
1,800 |
PCI Express®
Blocks |
4 |
4 |
4 |
4 |
6 |
Interlaken |
6 |
6 |
6 |
9 |
9 |
100G Ethernet |
4 |
4 |
6 |
7 |
9 |
GTH 16 Gb/s
Transceivers |
32 |
32 |
40 |
40 |
40 |
GTY 30.5 Gb/s
Transceivers |
32 |
32 |
36 |
36 |
36 |
I/O Pins (HP) |
650 |
650 |
650 |
650 |
650 |
I/O Voltage |
1.0 – 3.3V |
1.0 – 3.3V |
1.0 – 3.3V |
1.0 – 3.3V |
1.0 – 3.3V |
Features:
►x1
Xilinx Virtex UltraScale 095, 125, 160, or 190 FPGA
►x16
PCI Express Gen 3 end-point
►x1
expansion connector providing access to 64 single-ended (or 32
differential pairs) I/Os and 24
GTH (16G) serial transceivers
►x1
Z-RAY connector providing access to 16 GTY (30.5G) serial
transceivers, control pins, and power for mezzanine cards.
►x10
DDR4 memory components (72-bit) - 5GB
►x1
QDR IV memory component
►BPI
Flash Memory component for configuration
►x1
USB 2.0 (B) port
►x4
(available with all supported FPGAs) or x8 (available with U125, and
U190 FPGAs) SMP connectors for the GTY transceivers
►Supports
both PCI Express and Standalone operations
-
12V/8A
Power adapter for standalone operation
|
Ordering information:
Part Numbers:
HTG-VUS-X16PCIE-95
Price:
[Contact
Us]
HTG-VUS-X16PCIE-125
Price:
[Contact
Us]
HTG-VUS-X16PCIE-190
Price:
[Contact
Us] Kit
Content:
-HTG-828 platform
-User manual, schematic, PCIE, and DDR4 memory reference designs and
CFP4/QSFP28 reference demo |
Accessories (Z-RAY Modules) |
2GB Hybrid Memory Cube (HMC) Module
Part Number: HTG-ZR-HMC |
3-port SFP+ (3x10G) Module
3-Port SFP28 (3x25G) Module
Part Number: HTG-ZR-X3SFP+ [Buy
Online]
Part Number: HTG-ZR-X3SFP28 |
2-port QSFP+ Module
Part Number: HTG-ZR-X2QSFP+
[Buy
Online] |
3-Port SFP28 (3x25G) Module
Part Number: HTG-ZR-X3SFP28 |
2-Port QSFP28 (2x100G) Module
Part Number: HTG-ZR-QSFP28
[Buy
Online] |
CXP (12x10G) Module
Part Number: HTG-ZR-CXP [Buy
Online] |
x12 Tx/Rx FireFly Module
Part Number: HTG-ZR-FF [Buy
Online] |
|
|
|
|